Ion solo function

[yeletah]

Anyone know if it's possible to make a bump button on an ion function as a solo button. Ie, for blinders?

[Liamb]

Anyone know if it's possible to make a bump button on an ion function as a solo button. Ie, for blinders?

 

If you assign a channel to a sub is the bump not a default full intensity? Saying that there are a few different types of sub...

 

 

 

[Smallsy]

Anyone know if it's possible to make a bump button on an ion function as a solo button. Ie, for blinders?

 

[Channel] [X] [@] [Y] [Enter]

[Channel] [X] [Record] _{[Z] [Enter]}

_{Assign the sub to a fader}

_{[Z] [Enter] [Load] or you can assign it in setup..}

 

_{Each submaster bump can have three different timing values: Upfade, Dwell, and Downfade}

 

_{• Upfade time - this is the time for the submaster to fade from its home position to its target}

_{position (0 to Full if additive, Full to 0 if inhibitive). The default time is 0.}

_{• Dwell time - this is the time the submaster look will hold before starting the downfade. This}

_{can be set to a specified time, or to “Hold” or “Manual”. “Hold” time maintains the submaster}

_{values until the bump is pressed a second time. “Manual” time applies the submaster values}

_{only as long as the bump is held. The default is “Manual”.}

_{• Downfade time - this is the time for the submaster to fade from its target position to its home}

_{position. The default time is 0.}

[yeletah]

Thanks for the replies. What I really want to know however is whether a solo function is possible. I think the strand 500 had this option amongst inhibit, grand master and so on - you press the button and channel 1 flashes, and when this happens everything else goes out. Think rem dim but only while the button is depressed.

[mac500]

The work around is to have 0 values for everyother fixture except for the channel you want to solo. When you hit the bump button it should now take all the others out. Hope that makes sense.

[yeletah]

Gotcha. Thanks