mc0702 Posted May 26, 2012 Share Posted May 26, 2012 Hello Everyone, I've got an atomic 3000 where the cable is showing the internal cores. I want to fix this but I can't get the gland to undo. how do I undo it? any help would be much appreciated Link to comment Share on other sites More sharing options...
handyandi Posted May 26, 2012 Share Posted May 26, 2012 Looks like one of these get inside & squash the movable side & should pop out, with a bit of force. Link to comment Share on other sites More sharing options...
AndyJones Posted May 26, 2012 Share Posted May 26, 2012 Be very careful opening one of these up- there are a lot of high voltages present (even when unplugged!) Link to comment Share on other sites More sharing options...
mc0702 Posted May 26, 2012 Author Share Posted May 26, 2012 Thanks for the advice Link to comment Share on other sites More sharing options...
tokm Posted May 28, 2012 Share Posted May 28, 2012 Its quite a common retro-fit on Atomics (and other fixtures using this cable restraint method/device) to replace the push in glands with an M20 or 25 Gland, depending if you have 1.5mm or 2.5mm cable on them.. Ours are all like this and seemingly a lot of others peoples. Wasn't particularly hard to do from memory and now means a lot less repetitive maintenance :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.