osal Posted May 11, 2012 Share Posted May 11, 2012 hi sorry if this has already been covered but I have tried searching. for some reason on the work eos desk when I am using the riggers remote, Random channels wont turn off there seams to be no patten to this. I wondered if anybody else had a similar problem? Link to comment Share on other sites More sharing options...
gareth Posted May 11, 2012 Share Posted May 11, 2012 What keystrokes are you executing on the iRFR when attempting to turn them off? And what mode are you in - Live, Channel Check, etc? Link to comment Share on other sites More sharing options...
Liamb Posted May 12, 2012 Share Posted May 12, 2012 I 'think' that you cant change levels that have been set on the desk with the remote. I always start with everything @ 0 HTH Liam Link to comment Share on other sites More sharing options...
fazJ Posted May 12, 2012 Share Posted May 12, 2012 Sometimes I get that issue if the remote goes to sleep and back on again, and if I swap from live to chan check modes, things that are being bough up in live then wont go away if you go into chan check mode. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.