lampielex Posted November 4, 2011 Share Posted November 4, 2011 Hi all. About to start a few week tour Wednesday, and get told today that one of our 1200w centerlights has died. I NEED to get hold of a Griven Heleious 1200w or any other 1200w Centerpeice apart from a navigator as we already have one of thoes. Unless anyone knows anyone who can fix one ? apparently its the PCB that has died. we need help ASAP please. Massive thanks. Link to comment Share on other sites More sharing options...
Jivemaster Posted November 4, 2011 Share Posted November 4, 2011 http://www.griven.com/ Griven may likely still support the products that you have, some are even still made. Death of a PCB in long disco service usually means that there is so much smoke and haze residue inside that it becomes conductive and power tracks over the board killing chips in which case get a new board and clean all the other lights before this happens there. Link to comment Share on other sites More sharing options...
lampielex Posted November 5, 2011 Author Share Posted November 5, 2011 I have been in contact with griven already, it will take up to 3 weeks to get the parts we need, wich is ok for the end of the tour but we have 15 shows between now and then. :/ I will pass on this info to our supplyer and see what happens. Cheerz Lex Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.