TommyToad Posted January 20, 2005 Share Posted January 20, 2005 The desk where I do the lightning has gone completely wild, it's a Jands Event 24 and everytime it is started it says: "No of channels has changed 0, Press exit" When you press exit it just puts out random stuff on the displays and the faders don't work at all. You have to do a "hard reset", which deletes all the chases and stuff. I think it's maybe the battery that need to be replaced, Could it be that? Link to comment Share on other sites More sharing options...
slim_mcslim Posted January 20, 2005 Share Posted January 20, 2005 Sounds just like the same problem I had with my Jands ESP and Masterpieces both seemed to do strange ill-logical things when the batteries are flat. Link to comment Share on other sites More sharing options...
Ian Ferguson Posted January 21, 2005 Share Posted January 21, 2005 Give our technical team a call on 01494 446000, they are the service specialists for Jands products and should be able to help you Link to comment Share on other sites More sharing options...
TommyToad Posted January 25, 2005 Author Share Posted January 25, 2005 Sounds just like the same problem I had with my Jands ESP and Masterpieces both seemed to do strange ill-logical things when the batteries are flat.<{POST_SNAPBACK}>Could not figure out how to remove the battery so we will have it be changed by a professional. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.