gareth 2405 Posted October 10, 2011 Share Posted October 10, 2011 Hi all, I have an ev system which is 2x rx 118s/2x rx 212/75 being powered by 1xEV p3000 for subs and 1xEV p2000 for tops and an EV Dx 38 controller, my question is if I was to double up my pa with the same subs and tops would I have to get another amp and controller or would the amps I have run this system as I think it would be lowered from 4 ohms to 2 ohms?. Any advice would be great, Thanks Link to comment Share on other sites More sharing options...
sonicnrg Posted October 11, 2011 Share Posted October 11, 2011 I've doubled my 212/75's and ran them from a CP3000S @ 2 ohms. If the P2000, and P3000 are 2 ohm stable could be done... Link to comment Share on other sites More sharing options...
gareth 2405 Posted October 11, 2011 Author Share Posted October 11, 2011 I'm just worrid about overpowering the amps,how can I check what ohms my pa is running on, if it's 4 ohms will doubling up with the same speakers make it 2 ohms Link to comment Share on other sites More sharing options...
themadhippy Posted October 11, 2011 Share Posted October 11, 2011 if it's 4 ohms will doubling up with the same speakers make it 2 ohms if there in parallel then yes its 2 ohms Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.