beardedtech Posted October 8, 2011 Share Posted October 8, 2011 Hi In Live Mode, Shaded on WYSIWYG, I am trying to rotate the image so that I am facing straight on to the Stage (i.e. from a FOH POV). At the minute I can only get to about 45 degress off axis SR. I have tried all shortcuts but nothing seems to be working. Any advice would be grately appreciated. Cheers Damo Link to comment Share on other sites More sharing options...
kitlane Posted October 8, 2011 Share Posted October 8, 2011 Might it be easier to go into CAD mode, create a new Camera facing the stage and then switch to that Camera view in Shaded view? Link to comment Share on other sites More sharing options...
IRW Posted October 8, 2011 Share Posted October 8, 2011 Hold Ctrl whilst panning, and it should move the camera instead of panning. If you need to zoom,page up and page down are your friends. Ian Link to comment Share on other sites More sharing options...
beardedtech Posted October 8, 2011 Author Share Posted October 8, 2011 Kitlane - Thanks for this - how do I create a new camera? Ian - I tried this but it continues to pan even when ctrl is held down - is there an option to turn this on/off?? Thanks again.\ D Link to comment Share on other sites More sharing options...
IRW Posted October 8, 2011 Share Posted October 8, 2011 Kitlane - Thanks for this - how do I create a new camera? Ian - I tried this but it continues to pan even when ctrl is held down - is there an option to turn this on/off?? Thanks again.\ D Did you hold control before you started holding the left mouse button? AFAIK, there isn't an option.To create a new camera, I think the option is under the 'Draw' menu (It used to be in r16 anyway) Don't forget to set the missing co-ordinate, otherwise your new camera will be on the floor! Link to comment Share on other sites More sharing options...
beardedtech Posted October 8, 2011 Author Share Posted October 8, 2011 sorted - Cheers Ian :) Link to comment Share on other sites More sharing options...
grandMA_the_2nd Posted October 9, 2011 Share Posted October 9, 2011 In CAD mode draw cameras in, then in shaded view toggle between them by pressing 1, 2, 3 etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.