Blaize110 Posted September 28, 2011 Share Posted September 28, 2011 I have an Audio Technica ATW T52 handheld radio mic and an ATW R14 reciever. The mic has been bashed about a bit, being at a school, and it has developed a fault where the reciever will register full RF signal, but no AF signal or audio output. As if it were constantly on standby. I have looked inside and the wires from the board to the actual microphone are still good. But im not sure where else I should be checking. Has anyone got any tips or advice? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.