dalight Posted September 19, 2011 Share Posted September 19, 2011 Hi there.After working several years with wysiwyg only today I notice that the truss library of Prolyte and Eurotruss it is wrong!The Truss should have 0,29m and at WYG have 0,24m.Is it possible that I have done something wrong by my mistake?Tank you all!! Link to comment Share on other sites More sharing options...
Stupod Posted September 20, 2011 Share Posted September 20, 2011 Hi, It would appear that you are just misinterpreting how Wyg displays truss. If you are talking about Eurotruss FD34 series truss, 0.29m is the measurement of outside width including the pipes. However, Wyg shows centre lines of the pipes so 0.24 represents the centre to centre width no including the outside half of the pipes. Hope this helps Link to comment Share on other sites More sharing options...
dalight Posted September 21, 2011 Author Share Posted September 21, 2011 Yes,I noticed that looking at the truss and for thake shore I just meausure and it mades light in my head.Tank very much for your attention. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.