raymond.faccini Posted April 9, 2011 Share Posted April 9, 2011 We have a cobra 1504 amp which is not rearly big enough but as a small ameture group we can not afford a bigger one, we have a berhinger xenyx 1002 mixer which we would like to use to make things a little larger.We have a 2mic uhf unit a 2mic vhf unit 5 lead mics and a c.d.player.We do not know a lot about sound equipment can you please advise if we can use thes together and explain how to make the conections.Thank you in advanceRay Link to comment Share on other sites More sharing options...
Doug Siddons Posted April 9, 2011 Share Posted April 9, 2011 What I would do is plug all your mics etc into the behringer mixer then connect the main out of the mixer into channels 1and 2 on the carlsbro with the Gains on each channel on the carlsbro set to 0db and the channel eq set to Flat. Put the output of the carlsbro fully up and control the system volume from the behringer. (I think routing the mixer back throught the effect return would cause too many problems) Link to comment Share on other sites More sharing options...
Matthew Robinson Posted April 9, 2011 Share Posted April 9, 2011 From what I can find on the internet about your equipment, you need a two jack to jack cables (the type you would use for an electric guitar) to connect the output of your behringer to the input of your amp. Connect the L to one channel and pan it hard left, connect the R to another channel and pan it hard right. Set the gain to 0dB on the amp. Connect your microphones to the behringer desk and away you go. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.