adenbeck Posted March 25, 2011 Share Posted March 25, 2011 Hiya everyoneWe have downloaded the Pre-programmed Mania show for the SCX700 into the 2510 controller via Light Jockey (per user manual instruction) and connected our martin SCX 700's via XLR's but the units are not responding and are not receiving any data? any suggestions?cheers Lawrence Link to comment Share on other sites More sharing options...
sonicnrg Posted March 26, 2011 Share Posted March 26, 2011 Possibly.. Can I assume there's a phase reverse adapter cable in use with the 2510?If not, that might be it..It would fit with not responding, and no data. Are your SCX700's running with 1.1, or the updated 1.2?Think the pre-programmed shows where arranged for 1.1. If the SCX's are 1.2, there's a conflict with the shutter data, and you get no light output = not good. Link to comment Share on other sites More sharing options...
adenbeck Posted March 26, 2011 Author Share Posted March 26, 2011 Hi Thanks for that, how do I know if my SCX700's are running with 1.1, or the updated 1.2? CheersLawrence EDIT--------The 700's are running on 1.2 can they be downgraded to 1.1? If not, is there anything else that you suggest? Can the pre-programmed shows be fixed or are there any unofficial ones knocking around? CheersLawrence EDIT2---------Okay, just realised we don't have a phase reverse adapter so I'll pop one of the onto the setup as well as modify the shows for 1.2 I guess. ThanksAden Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.