Jump to content

DMX Projector shutter


MrBoomal

Recommended Posts

  • 2 months later...

Would it really be as simple has buying the board in the above post?

Then connecting power supply. DMX signal and a servo. If so does any one know which pins to attach G,2 & 3 to on the DMX connector? also any idea on connecting up the servo to the output of the board?

 

Thanks

Link to comment
Share on other sites

Would it really be as simple has buying the board in the above post?

Then connecting power supply. DMX signal and a servo. If so does any one know which pins to attach G,2 & 3 to on the DMX connector? also any idea on connecting up the servo to the output of the board?

 

Thanks

 

G, 2 & 3 should be connected to pins 1,2,3 in that order.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.