matt2001 Posted March 2, 2011 Share Posted March 2, 2011 Hi All technicians!! Simple question to those Martin Users. (Mac 600) I have a damaged cable. I need to replace it but am finding it impossible to release the Cable gland form the actual Unit ..... Any one know a SIMPLE way of doing this?? All I seem to be doing is damaging the cable even more. Regards Matt Link to comment Share on other sites More sharing options...
d.breeze Posted March 2, 2011 Share Posted March 2, 2011 Is it one of the standard 20mm hex cable glands? Have you tried putting an AJ on it? If it's really tight try some mole grips. Link to comment Share on other sites More sharing options...
matt2001 Posted March 2, 2011 Author Share Posted March 2, 2011 Hey, Na it was something really simple ..... Just like changing the lamp on a S.L .... Basically just slides out after a bit of encouragement and brutal force ... Cable has now been replaced and is now ready for lots of festivals of 2011!! Cheers for your help Buddy. Matt ::** laughs out loud **: CASE CLOSE :** laughs out loud **: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.