Jump to content

Problem with antari z1500 (Silver)


banginbeatsuk

Recommended Posts

Hi there, im new to the forum and just wondering if anyone can help... one of the bars that I am working in at the moment has a old antari z1500 in the storage. I thought id give it a try and checked it over then pluged it in.

 

When I plug in the machine the pump is constantly on (even before the machine has warmed up) which means that it squirts the liquid everywhere before it has heated up. it does however heat up ok, and the pump seems to work great! just wondering if anyone else has came across this problem before and also if anyone has an idea of what the problem might be..

 

 

Many thanks. Matt G

Link to comment
Share on other sites

always change the cheapest component first (triac from CPC/Maplin about one pound). the pump is ok anyway because you say it pumps as soon as power is applied. the triac is the electronic power switch so it seems logical that this is at fault here.

again unnecessary to change the board as the rest of it seems to work ok. as for diagrams I suggest asking Antari.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.