AZORES Posted February 15, 2011 Share Posted February 15, 2011 HiI need help.. How do I connect my Avolites Titan Expert 4.0 with the Screen Monkey, by Ethernet? What is the process? Link to comment Share on other sites More sharing options...
niclights Posted February 15, 2011 Share Posted February 15, 2011 First make sure you have latest fixture library installed as the personality was only recently updated. Then you need to set console IP in the same range as machine running SM. For example if both are linked through a router with gateway 192.168.1.1 then SM might be on 192.168.1.2 and console can be 192.168.1.3. This can be done from System menu. Next go to Setup DMX and open the Arnet nodes on the left. All being well the SM machine should show up automatically. Add this node to an Expert output. Make sure SM is running. Now switch back to Program, Patch/[Active Fixtures] and SM should show up on a softkey. Select this and then carry on as you would for a non-active fixture. This will automatically patch all the necessary components (ie. master, layer1, layer2 etc.) That should be it. If you add or change clips and want them to show in the Attribute Editor thumbnails you must restart SM and then use Patch/Update Personality. If any changes are detected SM will be an option in the softkeys. I think that's everything. If you're having difficulty with the networking part then there is a section in the manual on this. Link to comment Share on other sites More sharing options...
timsabre Posted February 15, 2011 Share Posted February 15, 2011 I think that's everything. If you're having difficulty with the networking part then there is a section in the manual on this. ...but make sure you have the latest manual because the network functions have been significantly updated in titan v4. Link to comment Share on other sites More sharing options...
EmmaThompson Posted February 15, 2011 Share Posted February 15, 2011 ...And if not, download it from our website: http://www.avolitesd...ads/Default.asp :) Link to comment Share on other sites More sharing options...
AZORES Posted February 15, 2011 Author Share Posted February 15, 2011 The brand screen monkey, has several personalities. What do I patch? Colour schen?Master and layers?Screen monkey? Sorry, but the video is new to me ... THANKS Link to comment Share on other sites More sharing options...
niclights Posted February 16, 2011 Share Posted February 16, 2011 When patching as an Active Fixture there should only be one option. When you choose this it will automatically patch all the parts you need. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.