MobileMikey Posted January 31, 2011 Share Posted January 31, 2011 Hi Guys, Just a quick question for any Jester ML users. When updating the fixture list will the palettes, fixtures and subs remain as they are saved on the desk? Is it safe to update the library when im halfway through programming a moving head lightshow? mikey Link to comment Share on other sites More sharing options...
jonhole Posted January 31, 2011 Share Posted January 31, 2011 Hi Mikey, Inside SETUP (SHIFT + Mode) you can save your show to USB. I would suggest you regularly do this whatever you are doing, but especially when loading information onto the desk such as the Global Fixture Library or new software updates. Link to comment Share on other sites More sharing options...
Impact Pete Posted February 3, 2011 Share Posted February 3, 2011 Hi Guys, Just a quick question for any Jester ML users. When updating the fixture list will the palettes, fixtures and subs remain as they are saved on the desk? Is it safe to update the library when im halfway through programming a moving head lightshow? mikey Fixture lists should be ok if like already said save data on USB but don't make the mistake that I did of upgrading the software (was running two desks, did preprogramming on older one came to run programs on updated desk and it would not work so updated the old desk to match and had to start all over again) Link to comment Share on other sites More sharing options...
osal Posted February 3, 2011 Share Posted February 3, 2011 Hi Guys, Just a quick question for any Jester ML users. When updating the fixture list will the palettes, fixtures and subs remain as they are saved on the desk? Is it safe to update the library when im halfway through programming a moving head lightshow? mikey dont do it! you will prob lose the subs because as impactpete has said you cant load older files onto the updated desk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.