BARTNKCMO Posted January 21, 2011 Share Posted January 21, 2011 I recently purchased a ENTTEC DMX USB PRO unit after Jeremy from ENTTEC came into our shop to pick up some equipment for his trade show booth at the USITT convention. I found it to be a great diagnostic tool when I bring fixtures home to work on. My question to the forum is this. Has anyone been able to use it with the Martin Light Jockey software or the Martin uploader software to update fixture EPROMS? I have a client who has given me several mini mac profiles and they requested the eprom be updated from 1.6 to ver 1.7 any help would be much appreciated Bart Link to comment Share on other sites More sharing options...
dirkenstein Posted January 21, 2011 Share Posted January 21, 2011 Hi, my understanding was that to use LightJockey, you needed one of the Martin USB DMX interfaces, as it effectively acts as a dongle for the software.It looks like they ship it with a separate key now, but there's no support for non-Martin DMX interfaces based on the manual, I'm afraid. See previous threads here Link to comment Share on other sites More sharing options...
BARTNKCMO Posted January 21, 2011 Author Share Posted January 21, 2011 I was just hoping someone had built a software or driver work around. We all know Martin likes to switch out pin configurations or have a reversed jumper on the main board so they can call it proprietary. Bart Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.