simonwest Posted January 11, 2011 Share Posted January 11, 2011 Hello I am wondering as to whether anyone else out there is using Shure UHF-R UR4D receivers and is using the Shure Workbench 5.0.4 for Mac software... This is a little bit of an user error on my part, not learning properly how to use mac networking functions (new to macs and don't quite know my way around properly yet...) On the mac the ethernet adapter id is en0 with my IP address set manually to 192.168.200.001... so the setting is using DHCP with manual address. The UR4D's are set to 192.168.200.005 / 006/007/008 ....ID's are 4/5/6/7 (so four receivers sequentially) It is a standard cat 5 cable (crossover never needed before), theres no firewalls on... Having a little malfunction of the my memory at the moment on the button or setting that is stopping me from allowing them to talk to each other when switching from design to live mode.... thanks for anyones help! Simon Figured it, You need to manually set en0 to 192.168.200.80 (so dhcp with manual address) Then it will work just as it should. Hope this helps anyone else.... Simon Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.