martin iep Posted November 30, 2010 Share Posted November 30, 2010 hello everyone, I have been working on moving lights for my company for a few years now and there is a few errors that are always reacurring issues. one of those is lamp error, typically it is always occuring on our mac 2k performances and wash units. Sometimes as soon as I lamp the fixtures they lamp error, and sometimes they will go down after a few minutes in a test, and no control functions work from the board. I was hoping someone would know more about this error and be able to point me in the right direction.the units are the original 2k performances and washes the board is a flying pig systems hog 2 Link to comment Share on other sites More sharing options...
The Seedage Posted November 30, 2010 Share Posted November 30, 2010 hello everyone, I have been working on moving lights for my company for a few years now and there is a few errors that are always reacurring issues. one of those is lamp error, typically it is always occuring on our mac 2k performances and wash units. Sometimes as soon as I lamp the fixtures they lamp error, and sometimes they will go down after a few minutes in a test, and no control functions work from the board. I was hoping someone would know more about this error and be able to point me in the right direction.the units are the original 2k performances and washes the board is a flying pig systems hog 2 How long since they were re-lamped? There is a sensor inside that detects the output of the lamp, and if it doesnt reach a certain level in a certain amount of time, cuts off the lamp circuit and shows LEER, as it assumes that the lamp has a fault. If they sometimes dont lamp on at all, definately my first place to look... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.