halftonner Posted November 26, 2010 Share Posted November 26, 2010 Hi, I've been playing round with Cast-Lighting's WYSIWYG and I've noticed that Prelude 16/30's (well, all prelude stuff) is about twice the size it should be .... it's even bigger than the Harmony profiles on the plan and in reality, Harmony kit is at least twice the size of preludes, so the plan should show them huge!!!!!! Is there any way of changing the size of fixtures so that they are proporionally correct? Link to comment Share on other sites More sharing options...
vinntec Posted November 26, 2010 Share Posted November 26, 2010 Hi,I've been playing round with Cast-Lighting's WYSIWYG and I've noticed that Prelude 16/30's (well, all prelude stuff) is about twice the size it should be .... it's even bigger than the Harmony profiles on the plan and in reality, Harmony kit is at least twice the size of preludes, so the plan should show them huge!!!!!! Is there any way of changing the size of fixtures so that they are proporionally correct?On my R25 WYSIWYG, the default symbol for a Prelude 16/30 is ever so slightly shorter than the real thing. Assuming it is a fairly recent version of WYSIWYG, the symbol should be set to "UKSymbol Strand Prelude 16/30". You will need check the properties in Library Browser and see which symbol it is using because it might just be pointing at a generic fixture rather than a specific one.Peter Vincent Link to comment Share on other sites More sharing options...
halftonner Posted November 30, 2010 Author Share Posted November 30, 2010 solved the problem ... and found how to change the symbols ... it was that the libary had chosen the wrong default symbol ... so after a bit of searching of the list I have changed it :** laughs out loud **: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.