jaket Posted November 4, 2010 Share Posted November 4, 2010 Hello all. Is there anyone out there who can help me with a 'little' problem I am having with a pair of studio due shark 250/c moving heads I recently bought... Both heads seam to be stuck in a demo or test mode: says 'dn1' which is LED speak for 'demo1'. I can access the menu, set the DMX address etc. There is an option MuSic which is set to auto, and cannot change it (keeping enter held down or similar). The MUSIC LED flashes about every 3 seconds... Tried DMX and no response. The main board shows DMX being received but stops when comes out of the initial 60 seconds power up. If anyone has a manual I would greatly appreciate you having a quick look for me as the download on Studio dues website downloads the shark 250 manual which complete different Link to comment Share on other sites More sharing options...
jaket Posted November 4, 2010 Author Share Posted November 4, 2010 Thanks for the msgs, although it was a good old proper look that sorted it in the end, header was off (in both) and DMX not getting though from control board. Shows I should look first, ask questions later If anyone has a manual I would still greatly appreciate it as the studio due stuff normally has a lot of tech data and schematics. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.