BobbyJ Posted October 29, 2010 Share Posted October 29, 2010 Hi, I've got a number of Sennheiser ew300 G1 (old I know!!) systems, and one of them has developed an interesting issue. I switched the receiver on, and once I got the tx tuned, saw the AF signal was peaking. Now I'm doing some experimenting (by unplugging arials), and found that the display seems to have switched some how such that the RF bar graph correlates to the signal strength from one arial, and the AF correlates to the other arial. The actual audio coming out is fine, its just quite usefull to be able to see what the AF is a lot of the time. Anyone have any idea how to switch it back? or if not, how to do a factory reset? which might fix it. Cheers Rob Link to comment Share on other sites More sharing options...
Shez Posted October 29, 2010 Share Posted October 29, 2010 Sounds a lot like the issue in this thread... Link to comment Share on other sites More sharing options...
BobbyJ Posted October 29, 2010 Author Share Posted October 29, 2010 so it is! :P did a quick search, but couldn't find anything that related....obviously didn't search hard enough! thanks though! Link to comment Share on other sites More sharing options...
paulears Posted October 29, 2010 Share Posted October 29, 2010 I did discover a strange mode, accessed by holding set and down, while turning on the power. This seems to be a way to test every element in the display - but I can't find any access to a reset function - sorry - I tried! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.