harrybow Posted October 14, 2010 Share Posted October 14, 2010 Hi I have a Mac 250 Krypton which seems to have a homing issue. Rather than homing to the standard position it is homing horizontally and I cant seem to work out why. I thought it might have something to do with the PCB sensor on the pan motor wheel i.e. possible dust issue but that doesn't seem to be it. Any thoughts? Dave Link to comment Share on other sites More sharing options...
stuart.thompson Posted October 14, 2010 Share Posted October 14, 2010 Hi Does the Mac 250 show any error codes after it has reset on the display ? Does it always reset to the same place or is it different every time ? Have you checked the tacho wheel to make sure there isn't any missing teeth ? Link to comment Share on other sites More sharing options...
LXbydesign Posted October 14, 2010 Share Posted October 14, 2010 All of the above and if it nothing on the fixture , then you may need to check the 'home' parameters setting on your lighting desk. Im sure you know that 'home' dosent have to be all movers pointing down etc etc. A 'home' can be set to whatever you want. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.