stevieboi Posted October 12, 2010 Share Posted October 12, 2010 Morning All, Have a bit of a problem with our RCF DX2006 Processor. Came in and powered it up this morning, and all of its settings - eq, limiter, crossover etc - have disappeared. The unit itself is in a locked cabinet, so nobody has been playing with it. Unfortunately we had not done a backup of the settings via the PC software to a file which we could restore. Has anybody had this problem occur before? Can we somehow recover all the settings? Any other advice? Thanks,Stephen Link to comment Share on other sites More sharing options...
jamesperrett Posted October 13, 2010 Share Posted October 13, 2010 Does it have a backup battery and could that have gone flat? If the settings are stored in flash memory, it could have detected that it had become corrupted and therefore it restored everything to the default settings. James. Link to comment Share on other sites More sharing options...
stevieboi Posted October 13, 2010 Author Share Posted October 13, 2010 Will check to see if it has a battery. However, it is a brand new unit, and it was fine the day before! System now re-eq'd and settings backed up incase it does it again! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.