JohnJarvis Posted October 9, 2010 Share Posted October 9, 2010 Hi new to this forum. Has anyone any experience in using and setting up the AR32. The info that comes with it is poor. Any assistance would be appreciated. Link to comment Share on other sites More sharing options...
Richard CSL Posted October 10, 2010 Share Posted October 10, 2010 have you read this.http://www.google.co.uk/url?sa=t&sourc...9tjYSRjZtkGwGoQ Link to comment Share on other sites More sharing options...
JohnJarvis Posted October 10, 2010 Author Share Posted October 10, 2010 have you read this.http://www.google.co.uk/url?sa=t&sourc...9tjYSRjZtkGwGoQ Hi Richard Yes have read it, still confused! Link to comment Share on other sites More sharing options...
peza2010 Posted October 11, 2010 Share Posted October 11, 2010 What specific parts are you confused by? It's always useful to know specifics on this forum, as not many members are likely to write out the user guide in there own words so to speak. What have you tried? Is there anything specific your having problems with or don't understand? Link to comment Share on other sites More sharing options...
matt c Posted October 12, 2010 Share Posted October 12, 2010 Hi Richard Yes have read it, still confused! Don't blame you for that... About AR-32PWhen unpacking, please check the unit is not damaged. If something wrong has happened to this product,contact the local dealer immediately.All rights reserved. No part of this manual included with this product can be reproduced or transmitted inany form, by any means for any purpose without authorized permission.WarningThis product of AR-32P ARCHI Recorder with DMX in & out interface, is a tension provider and a junctionbox in the AP-32 system, and can be used via a combination with AR-32C.1.The ground connection should be so essential for this unit.2.Keep the unit dry, do not expose it to water or high levels of humid.3.Do not open this unit, there is no user serviceable part inside-Risk Of Electric Shock! Could be better, I think. Reads like it's been converted from Polish, to English, then to Spanish, and then back to English again... Link to comment Share on other sites More sharing options...
JohnJarvis Posted October 13, 2010 Author Share Posted October 13, 2010 Hi Richard Yes have read it, still confused! Don't blame you for that... About AR-32PWhen unpacking, please check the unit is not damaged. If something wrong has happened to this product,contact the local dealer immediately.All rights reserved. No part of this manual included with this product can be reproduced or transmitted inany form, by any means for any purpose without authorized permission.WarningThis product of AR-32P ARCHI Recorder with DMX in & out interface, is a tension provider and a junctionbox in the AP-32 system, and can be used via a combination with AR-32C.1.The ground connection should be so essential for this unit.2.Keep the unit dry, do not expose it to water or high levels of humid.3.Do not open this unit, there is no user serviceable part inside-Risk Of Electric Shock! Could be better, I think. Reads like it's been converted from Polish, to English, then to Spanish, and then back to English again... A concurrent post has been automatically merged from this point on. Thanks to those who have replied. My main problem is understanding the instructions. For English read double Dutch! For example it invites you to open a "Flash file" but doesn't define what it is. I have a simple program running from a laptop via a Velleman USB to DMX interface controlling a number of DMX dimmers, relays, Servo controllers etc. That all works. The AR 32 was bought to record a pre existing set of DMX instuctions and make them available "At the touch of a button" or remote control. I think from the sales literature that this unit will do this if nly I can understand how!. I have today had an offer of assistance fron the distributers Prolight. Will report further if I make any progress. Would still be pleased to hear from anyone successfully using this equipment. Link to comment Share on other sites More sharing options...
henny Posted October 14, 2010 Share Posted October 14, 2010 Hi, I had the fun of programming one of these units back in the summer,once you get your head around the silly system its easy. simply put you use the DMX Record function to record Scenes that you put in a folder together down in the program files folder, you then use the Edit Show option to load those scenes in to the shows on the controller. ignore the flash files thing its for pixel mapping to 3 channel (RGB) led units from a flash animation. cheers Ian Link to comment Share on other sites More sharing options...
JohnJarvis Posted October 15, 2010 Author Share Posted October 15, 2010 Thanks Ian for the info, hopefully now its starting to come together. Cheers John Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.