barn01 Posted September 3, 2010 Share Posted September 3, 2010 Hi, I need to buy some clamps for Par16s but am unsure whether I need a standard size or if there is a small size. Also on a tight budget so if anyone knows of where I can pick up the suitable size, most appreciated. Cheers Link to comment Share on other sites More sharing options...
Smiffy Posted September 3, 2010 Share Posted September 3, 2010 Call TMB... I recall that they have a mini clamp type thing for them. Could even try Doughty. Cheers Smiffy Link to comment Share on other sites More sharing options...
boatman Posted September 3, 2010 Share Posted September 3, 2010 Hi, I need to buy some clamps for Par16s but am unsure whether I need a standard size or if there is a small size. Also on a tight budget so if anyone knows of where I can pick up the suitable size, most appreciated. Cheers It depends on to what you are clamping them. If it's truss or 48.3mm pipe then you'll need standard clamps. These or these are about as cheap as you can buy anywhere. Link to comment Share on other sites More sharing options...
Tom Baldwin Posted September 3, 2010 Share Posted September 3, 2010 It's possible to get lightweight clamps for standard barrel, which are much better suited to birdies than the regular hook clamps are. Pretty sure we bought ours from AC. Link to comment Share on other sites More sharing options...
Tom Posted September 4, 2010 Share Posted September 4, 2010 Have a look at Doughty products. They do a lightweight hook clamp (up to 2kg) which they show being used with their Birdies. Alternatively they do a lightweight half couplers which are over kill but look neat. T Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.