Jump to content

HELP! - HELL RC-RX/Dimmer 150W issues


flex01

Recommended Posts

hi,

 

we've hired two wireless units from Stage who are shut this weekend and unfortunately they did not send manuals with the units, the receiver/dimmers are Howard Eaton Lighting RC-RX/Dimmer 150W units and I was wondering if anyone could give me some info on them,

 

ideally the manual!

 

the intention is to have the unit power a length of RGB led strip,

 

the problem is I need DMX out of the HELL units aswell as the dc dimmer out from the battery, and im not sure which pins on the back of the uni the DMX thru is?

 

im also not sure which mode setting the units should be in?

 

any advice or info would be greatly appreciated,

Link to comment
Share on other sites

Bank Holiday.

 

At the risk of teaching you to suck eggs have you googled the manual?

 

Or see what you can do with a voltmeter? DMX is "standard" pin out (well 3 pin or 5 pin...) so perhaps you can go back to first principles?

 

Plus you might bend the ears of Stage for NOT including the manual...which, to my mind renders the units unuseable...after all you might be a complete and utter novice to DMX...

 

Best of luck anyway.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.