LX-Dave Posted August 29, 2010 Share Posted August 29, 2010 Hi all, I have recently been experimenting with Magic Q PC from Chamsys, and am trying to connect to one of the demo capture files from Chamsys' download site, however I cannot get the visualiser to respond. The patch matches, and I have "Send to applications on this PC" enabled in MagicQ. I am using MagicQ version 1.3.6.0 on a PC running Windows Vista and the capture file is the "Robe Artnet" one. When I load the capture file, I get the following error message: Multiple Network Addresses Detected. Please choose one in the options Anyone able to help? Lx-Dave Link to comment Share on other sites More sharing options...
neilalexrose Posted August 29, 2010 Share Posted August 29, 2010 Multiple Network Addresses Detected. Please choose one in the options Have you read their 'interfacing to capture' guide from the download site? I suspect the bit you need to pay attention to is the loopback IP address, which needs setting in magicQ and also within windows. (127.0.0.1). It sounds like at present the IP addresses for magicQ and windows are different, hence the 'multiple network addresses detected' message from capture. Neil Link to comment Share on other sites More sharing options...
LX-Dave Posted August 30, 2010 Author Share Posted August 30, 2010 Thanks, I will try that. Lx Dave Link to comment Share on other sites More sharing options...
LX-Dave Posted September 4, 2010 Author Share Posted September 4, 2010 I have read that, and have tried changing the IP address in windows and in MagicQ, but with no luck. Any suggestions? Link to comment Share on other sites More sharing options...
Wol Posted September 4, 2010 Share Posted September 4, 2010 I am using MagicQ version 1.3.6.0 on a PC running Windows Vista and the capture file is the "Robe Artnet" one. Firstly, is there any reason why you're using a version of MagicQ which is 15 months old? We've had quite a few versions since then! Would definitely recommend upgrading to the latest stable. When I load the capture file, I get the following error message: Multiple Network Addresses Detected. Please choose one in the options I'm guessing thats just an information message where its found multiple network adapters on your PC and doesn't know which one to use. What does it show when you open up the options? Did you choose one to use? Link to comment Share on other sites More sharing options...
LX-Dave Posted September 4, 2010 Author Share Posted September 4, 2010 Firstly, is there any reason why you're using a version of MagicQ which is 15 months old? We've had quite a few versions since then! Would definitely recommend upgrading to the latest stable. Only because I hadn't got round to downloading the latest one ;) I'm guessing thats just an information message where its found multiple network adapters on your PC and doesn't know which one to use. What does it show when you open up the options? Did you choose one to use? I can't find any "options" to open... since it is a standalone capture file, and not the actual application Dave A concurrent post has been automatically merged from this point on. Now why didn't I try that before!? Installed the latest release and it all works great Thanks for your help! Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.