Sony BRC 300 Connection

[gloria.hanger]

I have a BRC 300 and a RM-BR300. I need to make the cable to connect the two. The connection is Visca 422 due to distance (so im using the green phoenix connector).

 

I have the sony pinout infront of me but I dont understand what pins connect to what.

 

Do I connect pins 5 thru 9 at the controller end and pins 1 thru 5 at the camera end?

 

Thanks for answering such a basic question.

 

When it's working I'll stick a cat5 female plug at with a little bit of cat5 into the Phoenix connector so I can use any bit of cat 5.

 

thanks guys.

 

http://img144.imageshack.us/img144/1624/visca.jpg

[overhyped]

You mention pin 9?

>Someone please correct me if I'm wrong, but I thought visca only used 8 pins?

 

Connector wise, if you're looking at the DIN socket, then this should do the job for pretty much any connections:

http://www.audio-workshop.co.uk/cams/visca..._and_wiring.jpg

 

(If That pic is wrong, then the Joystick > VISCA interface I'm making will get really interesting...)

 

HTH

 

OH

[gloria.hanger]

SOLVED:

 

Below is the solution for anyone that gets stuck on this in the future.

 

http://img13.imageshack.us/img13/9494/viscaanswer.png