jason.san Posted February 13, 2010 Share Posted February 13, 2010 Hi, oh no, not nexo again I hear you say! sorry guys, but how do I actually wire up the sense lines for my Nexo PS15s? I have the controller (obv) and a camco 6 amp post in the right direction please thanksJason Link to comment Share on other sites More sharing options...
Simon Lewis Posted February 13, 2010 Share Posted February 13, 2010 Jason, Make a connection from the respective amplifier loudspeaker outputs to the corresponding inputs on the sense terminal strip. The manual is quite helpful... Simon Link to comment Share on other sites More sharing options...
dougjm Posted February 14, 2010 Share Posted February 14, 2010 Since you're using a V6 amp I'd break take the feed for the speakers from one NL4 output and use the other output for the sense lines. The second output is reversed on the amp so take care to double check which way you wire up the channels into the TD controler. I use 2 pair cable to do the sense back - it doesn't need to be heavy duty. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.