TrickyNicky Posted February 5, 2010 Share Posted February 5, 2010 Hi Guys, I was wondering, After you have created a chase on an ion and assigned it to a fader on one of there universal wings is there any way the fader can control the intensity of the effect rather than just using the bump button? Thank you Nick :) Link to comment Share on other sites More sharing options...
JDLX Posted February 5, 2010 Share Posted February 5, 2010 Hi Guys, I was wondering, After you have created a chase on an ion and assigned it to a fader on one of there universal wings is there any way the fader can control the intensity of the effect rather than just using the bump button? Thank you Nick :) If memory serves there are 2 'bump' buttons under each fader, one should start the fx running and 1 bumps the effect to full. If you hit the one bump button (I think its the lower one) the effect should start and you can then control the intensity with the fader. Does the alex have an Ion now then? :) Link to comment Share on other sites More sharing options...
GridGirl Posted February 6, 2010 Share Posted February 6, 2010 It's worth noting that questions regarding ETC desks, while probably getting helpful answers here (I do believe that one BR member works for ETC), may also be worth posting over at the ETC forums - we've had really speedy answers to our Ion questions over there. Link to comment Share on other sites More sharing options...
TrickyNicky Posted February 6, 2010 Author Share Posted February 6, 2010 Hi Guys, I was wondering, After you have created a chase on an ion and assigned it to a fader on one of there universal wings is there any way the fader can control the intensity of the effect rather than just using the bump button? Thank you Nick :) If memory serves there are 2 'bump' buttons under each fader, one should start the fx running and 1 bumps the effect to full. If you hit the one bump button (I think its the lower one) the effect should start and you can then control the intensity with the fader. Does the alex have an Ion now then? :) Well you can set the bump button to flash the effect at 100% or toggle run/stop running again at 100% in the menu, but the fader has no effect either way. you are correct the Alex now has an ion(as well as a few other recent upgrades). Have you been to the Alex before? Link to comment Share on other sites More sharing options...
Dmills Posted February 7, 2010 Share Posted February 7, 2010 The fader type must be effectSub and the choice of size or speed being controlled is set by the entry type of the effect. See page 243 of the V1.7 manual for the details. Regards, Dan. Link to comment Share on other sites More sharing options...
TrickyNicky Posted February 7, 2010 Author Share Posted February 7, 2010 The fader type must be effectSub and the choice of size or speed being controlled is set by the entry type of the effect. See page 243 of the V1.7 manual for the details. Regards, Dan. Thanks Dan, The desk only shipped with V1.5 manual. but you were exactly right. CheersNick :) :) B-) Link to comment Share on other sites More sharing options...
JDLX Posted February 8, 2010 Share Posted February 8, 2010 Hi Guys, I was wondering, After you have created a chase on an ion and assigned it to a fader on one of there universal wings is there any way the fader can control the intensity of the effect rather than just using the bump button? Thank you Nick If memory serves there are 2 'bump' buttons under each fader, one should start the fx running and 1 bumps the effect to full. If you hit the one bump button (I think its the lower one) the effect should start and you can then control the intensity with the fader. Does the alex have an Ion now then? :unsure: Well you can set the bump button to flash the effect at 100% or toggle run/stop running again at 100% in the menu, but the fader has no effect either way. you are correct the Alex now has an ion(as well as a few other recent upgrades). Have you been to the Alex before? Not for work, but to watch things. Glad you got it sorted :huh: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.