skippy Posted December 3, 2009 Share Posted December 3, 2009 Hi Folks, I'm having a bit of brain fade OR something is wrong....I can't seem to get my dipswitch settings right on my Ibeams with my fatfrog. One would think, using a multiplier, that switches 1,5 & 6 would give me channel 49 as my starting channel for my 1st Ibeam, but noooo. Any help would be very much appreciated. Cheers John E. Link to comment Share on other sites More sharing options...
son of lx dad Posted December 3, 2009 Share Posted December 3, 2009 Read this. maybe it may help a bit. Link to comment Share on other sites More sharing options...
gyro_gearloose Posted December 3, 2009 Share Posted December 3, 2009 Do any of the dip switches control things such as master/slave modes, sound to light, etc? The dip switch settings you've given should give you an address of 49 only as long as the switches correspond to 1, 16, and 32. Link to comment Share on other sites More sharing options...
dmoffat Posted December 3, 2009 Share Posted December 3, 2009 quite often it is a requirement to cycle the power in order for the DMX address to be read. I hope that helps Dave Link to comment Share on other sites More sharing options...
niclights Posted December 4, 2009 Share Posted December 4, 2009 Intella's do things differently. Essentially you need to add one to the usual values: http://www.highend.com/pdfs/support/quickr...witch_chart.pdf Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.