altonsnoiseboy Posted November 20, 2009 Share Posted November 20, 2009 Greetings all, Quick one from your friendly noise boy who has to pretend to be a lampie once in a while! I have a MAC250 Entour here that has had to have a new PCB main board installed as the other one had developed a fault. Now the lovely folks at Martin sent the part within 4 days (I was impressed,normally takes a month or two!) I have installed the new board and checked,re checked and double checked the connections, no issues there! However, and this is the fun bit! They have sent me the right board but with the Krypton software installed not the Entour software. Here's where I need your help, Is there ANY way I can update the software or change it somehow to get the software to boot in Entour not Krypton?! Any suggestions would be good and oh, I don't have any other load ups for MAC's, just running a Pearl Tiger 2008 and standard DMX protocols with no fancy servers or anything, just good old fashioned LX! Many Thanks Your not so smart loud lampie Matt Link to comment Share on other sites More sharing options...
timmeh2 Posted November 20, 2009 Share Posted November 20, 2009 Hi You could try using a Martin MP2 if you can find one, however I'd be more tempted to send it back to Martin and ask them for the correct one. You can of course patch an Entour as a Krypton and everything will work bar the fixed gobo wheel. You could patch this as a dimmer as DMX address + 18 (in 16bit extended mode) All the bestTimmeh Link to comment Share on other sites More sharing options...
altonsnoiseboy Posted November 20, 2009 Author Share Posted November 20, 2009 many thanks, will definitely be getting the one board sent back and another one sent to me first thing monday! Many thanks, Looks like this plot will happen without this fixture! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.