Antari ICE, LowFog, No power to pump.

[deejaybaze]

Hello.

 

We have 3 LowFoggers, After a few hours of service and cleening I got 1 to work.

 

I have 2 left. I found that the transformer looses it's weling, so thats fixed.

But when I fire the machine up and hits "Fog". The pump for the liquid dosnt get any power.

 

Has annyone the same problem?

The 2 machines I have left has the samt problem.

 

Probably just to change a small part.. But wich part?

 

Thanks in advance...

[jamed2017]

If I was you I would check first of all the pump is getting power from the PCB, (Pressuming it has a pcb). If not your pumps fine and the problems upstream on the PCB.

When pressing the pump button does anything else happen as you might have a faulty remote/button

I'ld check those first.

 

Jimmy

[Joe White]

On the small ice foggers once the block has heated up, The ready light will come on and at the press of the fire button the fan should come on at the same time as the pump. IF the pump doesn't come on but the fan does then it is likely that the pump has failed.

 

There not that expensive but there a pain in the A** to get into, if your competent put a meter over the pump contacts and check that your getting approx +100VAC across it when you press the fire button. Joe