jonny9720 Posted March 21, 2009 Posted March 21, 2009 Good evening all! Just got back from a local school where they have a Botex 72 Demuxer connected to two Strand Act 6 dimmer. What should the wiring be for this?? It has the 8 Pin Dins on the dimmer and then goes into the demuxer via a 25pin D Plug. Now what should the wiring be on the D Plug. I have tried with the Channel connections going on the 1,2,3,4,5,6 pins but it only uses every other channel of the DMX mixing desk. Am I missing anything vital here or is it so obvious that im going to kick myself when I find out! oh and btw I made the cables for it! So no one else to blame but me!! :P Thanks! Jonny
boatman Posted March 21, 2009 Posted March 21, 2009 Isn't the Botex demux a clone of the Showtec MultiExchanger 72? If so the outputs are on pins 1, 14, 2, 15 etc as per this picture of the rear panel taken from the manual. http://img.villagephotos.com/p/2006-5/1185528/ShowtecMultiExchangerBack.jpg
boswell Posted March 21, 2009 Posted March 21, 2009 Botex website via Google http://www.botex-germany.de/pdf/Co/5225b_en.pdf Not much effort required
Recommended Posts
Archived
This topic is now archived and is closed to further replies.