csg Posted March 7, 2009 Posted March 7, 2009 I have a mac300 on the bench at the moment. It turns on and calibrates correctly, and then displays its address as you would expect. It does not show any error messages, and will run through its test program correctly. The unit will not respond to DMX, and the DMX indicator on the control pannel does not illuminate I have checked continuity from the input, through the loom to the main DMX / drive card in the arm with no issues. the DMX source is working correctly and other macs will run as normal from the same data source Nothing looks missing, loose or damaged, so im a bit stumped. Any ideas?
richardtank Posted March 7, 2009 Posted March 7, 2009 Make sure it's using a DMX address and not expecting Martin's own brand of DMX
smalljoshua Posted March 7, 2009 Posted March 7, 2009 Have you tried changing the DMX receive chip out from a working fixture to this one? Josh
Recommended Posts
Archived
This topic is now archived and is closed to further replies.