techmonkey Posted March 2, 2009 Share Posted March 2, 2009 Hi There I am looking for some advice about the DMX input on a Jester ML 24. I have linked a Jester 24/48 into the DMX in on a Jester ML 24, the trouble is that I only seem to be able to control the 1st 24 channels on both desks. I linked them together hoping that I would be able to control 48 channels and 6 movers from the Jester ML 24 Go/Program button. However I only seem to be able to add a wing of 24, and that wing will only control the same 24 channels as the ML's 24 Channels. Am missing something obvious? Does anybody know of a soultion to this problem? Is there a way to expand the wing size to 48 channels? Or have any other suggestions? I would love some advice! Thanks Peter Link to comment Share on other sites More sharing options...
smalljoshua Posted March 2, 2009 Share Posted March 2, 2009 Have you patched anything like movers onto your desk? If not, I'll make a show file for both the ML24 and the 24/48 for you to load on. I'll post the config at the same time. What movers are you using so I can patch them too. Josh Link to comment Share on other sites More sharing options...
techmonkey Posted March 2, 2009 Author Share Posted March 2, 2009 Have you patched anything like movers onto your desk? If not, I'll make a show file for both the ML24 and the 24/28 for you to load on. I'll post the config at the same time. What movers are you using so I can patch them too. Josh That would be great, thank you! Yes, I have patched four of the movers they are 6 Omni Sistem Pilot 250's but I cant remember the adresses off the top of my head! So no worries if you cant do that bit! Peter Link to comment Share on other sites More sharing options...
smalljoshua Posted March 2, 2009 Share Posted March 2, 2009 If you could PM me your email address I will send you the show file. As for the 24/48 As long as you set that to a 1:1 patch and Page B to 25-48 it will work fine. Josh Link to comment Share on other sites More sharing options...
techmonkey Posted March 2, 2009 Author Share Posted March 2, 2009 Thank you for your help! It's gibbonspc (at) aol.com Peter Moderation: Please note - in general it's not a good idea to post your email address in open forum - it's just an invitation to spammers. Best to use the PM function Link to comment Share on other sites More sharing options...
smalljoshua Posted March 2, 2009 Share Posted March 2, 2009 I have sent the file. The settings I have changed from the default are. DMX Patch: I have patched desk channels 25-48 to DMX channels 25-48. DMX Input Setup: Mode (Chans+Subs) & Wing Width (24) Josh Link to comment Share on other sites More sharing options...
johnhuson Posted March 3, 2009 Share Posted March 3, 2009 Friendly little tip, unless you like receiving lots of spam email it's best not to post your email address on a public forum like this, particularly with a mailto link. Using the Private Messaging system (PM) on here is a far better way. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.