gdavey Posted February 11, 2009 Share Posted February 11, 2009 I have an INTER-M PA-935, which I was intending to use for my show relay system. I thought I'd set it up in my office first, before installing just to check it works and I'm glad I did cos I couldn't get anything from it. I have some Monacor 100v wall speakers and I just couldn't get anything out of them. I tried metering out of the back of the amp and couldn't get any reading. Should I be getting 100V across the terminals? I've checked the microphone and cables so it's not that... Any help greatly received Link to comment Share on other sites More sharing options...
boswell Posted February 11, 2009 Share Posted February 11, 2009 This amp also has 4R & 8R speaker outputs so you can check them using a standard speaker.Make sure that the mutes are not enabled !!Download the manual and make sure you have set it up correctlyHTH Link to comment Share on other sites More sharing options...
Brian Posted February 11, 2009 Share Posted February 11, 2009 Should I be getting 100V across the terminals? I've checked the microphone and cables so it's not that...No. The 100v bit is the ac voltage you'll measure on the output of the amp what it's being driven at it's rated level (whatever that may be). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.