chrispuxley Posted January 26, 2009 Share Posted January 26, 2009 Hello, Does anyone here use a K3 on monitor duties - there is an obvious limitation out of the factory that the groups and auxes cannot be swapped to allow graphics to be inserted. You can add additional group fader modules to allow aux masters on faders but these are not readily available! Has anyone come up with workarounds or modifications to make it more suitable? Regards, Chris Link to comment Share on other sites More sharing options...
mervaka Posted January 26, 2009 Share Posted January 26, 2009 could you not put the graphic EQs between the desk and amps? I know this doesn't solve the fader problem, but will give you some EQ. Link to comment Share on other sites More sharing options...
chrispuxley Posted January 26, 2009 Author Share Posted January 26, 2009 could you not put the graphic EQs between the desk and amps? I know this doesn't solve the fader problem, but will give you some EQ.Could do - but really need the graphics inserted so the AFL is a true reflection of what each mix sounds like. Link to comment Share on other sites More sharing options...
Kevin Ross Posted January 26, 2009 Share Posted January 26, 2009 Hmmm a few options are springing to mind 1) Add the EQs etc inline with the AUX sends with the associated pros/cons 2) Route the AUX outs back into spare channels and then send those channels to the groups, also gives you a handy extra eq Both options have there drawbacks so it really is up to you as to which is the lesser of 2 evils. Personally I would use option 2 if I had spare channels Hope this helps Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.