Gerry Posted January 23, 2009 Share Posted January 23, 2009 Just bought a 6 way colour wheel controller and power supply.The power supply should output 24V for the wheel motors and 12V for the controller.Only outputs 18V for the motors and about 6V for the controller.Looking inside the power supply I can see its been "modified"There are 3 zenner diodes in series with the 24V supply, hence the voltage drop.Removing these gives the correct 24V.Not sure what has been done with the 12v supply.Anybody have a wiring diagram for one of these power supplies?CheersGerry Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.