Gooders Posted January 19, 2009 Share Posted January 19, 2009 I have a problem in our local school hall. They have a multicore cable with 12 lines that our armature group can hire when we use the hall. The problem I have is that I need more lines than the school has installed. At the moment I am using a hired multicore to get around the problem but this being a school hall all the kit has to go in and out after every show. I would like to use the current cable or to run a CAT5 cable that I could leave in and not have to worry about it being lost stolen or damaged. So does anyone know of a way to run multiple balanced audio over either one or two balanced XLR cables or a CAT5? I'm thinking if the signals are converted from analogue to digital this would reduce the number of cables required. Then all I would need is another convertor at the other end to convert them back to analogue again to put back in the desk. Link to comment Share on other sites More sharing options...
mervaka Posted January 19, 2009 Share Posted January 19, 2009 there is, but it doesn't come cheap. the cheapest option is probably the brikworm. it would also be worth looking into Ethersound and Cobranet. Link to comment Share on other sites More sharing options...
Gooders Posted January 19, 2009 Author Share Posted January 19, 2009 there is, but it doesn't come cheap. the cheapest option is probably the brikworm. it would also be worth looking into Ethersound and Cobranet. That is the kind of thing I'm looking for. Your right about the cost! I will have a look at the others. Link to comment Share on other sites More sharing options...
hounsome Posted January 19, 2009 Share Posted January 19, 2009 Have a look at the Roland Stage box system. I here it is a good system have not used it myself. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.