MJU Posted December 12, 2008 Share Posted December 12, 2008 Hi all, I hope you can help me. In the school I used to attend, we have a Strand 300 series lighting desk... im not too sure exactly which one it is, but it has gremlins! While I was doing a show at Hampstead Theatre, the tech there gave me a sheet on how to reset the board back to factory settings... I have lost that sheet :( Does anyone know how to do this? All I remember is something about holding Q on shutdown Hope you can help MJ Link to comment Share on other sites More sharing options...
gherriott Posted December 12, 2008 Share Posted December 12, 2008 do you mean a 220 clean? if so then shutdown the desk then when you get to the 'it is now safe to shutdown' screen, hit 'x', this will put you in dos. from here type '220clean' and hit enter. Then just follow the instructions to clear what you want. Once it has finished just type 'os' then enter, this will get you back into the software. Hope this helps. Link to comment Share on other sites More sharing options...
themadhippy Posted December 12, 2008 Share Posted December 12, 2008 You need to get to a dos prompt,I find hitting ctrl and c when first turning on the desk works best for me,whatever way you achieve it once at a dos promt (c:>) type 220clean and answer the questions.Another quick and dirty way of running it is not shutting the desk down,just unplug it, Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.