Mr_S Posted December 9, 2008 Share Posted December 9, 2008 Hi New to this site, but looking for some help, just bought some 2nd hand Acme Knight Spots which I want to hang on my triangle truss, they did not come with any brackets or clamps, does anyone know what I can use and where I can get them? Thanks D Link to comment Share on other sites More sharing options...
Sound In Gloucestershire Posted December 9, 2008 Share Posted December 9, 2008 I know the acme I solution moving heads have 2 holes which fit a standard G Clamp bolt perfectly, thats what we used when Acme had no stock of the mounting plates, worth checking on yours Link to comment Share on other sites More sharing options...
Aaron-Hill07 Posted December 9, 2008 Share Posted December 9, 2008 On the bottom of the spot knight you should have 5 holes. 1 slap bang in the centre which is for the eyehook for safety chains. And, on either end on the bottom of the fixture there are 2 holes, 1 big 1 small. Standard G-Clamp bolts should go directly into the bigger of the two holes.Don't worry about the bolts being too long and damaging any of the electrics as the part that your screwing into is empty hope that helps mate Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.