Jands Event 408 submasters

[eirikbt]

Hi!

 

I'm working with the Jands Event 408 console and have read the manual a couple of times now. I know from another post here at the blue-room that it's possible to use 12 of the 48 channel faders as submasters in addition to the assign master faders, but how do I do it? I cant find out from the manual. I hope someone can help me. 

 

Thank you!

Eirik

[ei1234]

From memory, put the desk into single mode and assign 48 faders instead of 24 (this will help but not essential) then all you have to do is record the memory, then assign the memory as you would normally to anyother of the submasters using the pulse buttons (can't rember whether it is 12 extra or 8 anyway work back from fader 48 until you are unable to assign anymore). hope this helps

[eirikbt]

From memory, put the desk into single mode and assign 48 faders instead of 24 (this will help but not essential) then all you have to do is record the memory, then assign the memory as you would normally to anyother of the submasters using the pulse buttons (can't rember whether it is 12 extra or 8 anyway work back from fader 48 until you are unable to assign anymore). hope this helps

 

Thank you! That was very helpful! Have a nice day!  :)