magicolour Posted March 6, 2008 Share Posted March 6, 2008 Does anyone know where I could buy the sticky tape to ID cables and their length (like stage electrics use). I saw it somwhere once before but now cant remeber where! thanks Link to comment Share on other sites More sharing options...
frazer Posted March 6, 2008 Share Posted March 6, 2008 Lemark do them. Frazer Link to comment Share on other sites More sharing options...
bruce Posted March 6, 2008 Share Posted March 6, 2008 LemarkRS Link to comment Share on other sites More sharing options...
Bobbsy Posted March 6, 2008 Share Posted March 6, 2008 Canford too if you're desperate but I think the first two options mentioned are less expensive. Bob Link to comment Share on other sites More sharing options...
boatman Posted March 6, 2008 Share Posted March 6, 2008 CPC Link to comment Share on other sites More sharing options...
Chiefy Posted March 6, 2008 Share Posted March 6, 2008 You want the 'cable wraps' from Le Mark as mentioned once or twice ... I have just ordered a load with sequential numbering together with our company logo (four colours) Link to comment Share on other sites More sharing options...
Sirch Sound Posted March 7, 2008 Share Posted March 7, 2008 Going slightly OT but does anyone know of a company that will make you smaller quantitys of these? I have about 100-200 cables and the smalest lemark will make is 500. If not, an easy ay of cables marking without having to take plugs off and so I can still put a company name on them, instead of just different coloured tape and zipties. Rich Link to comment Share on other sites More sharing options...
dunk Posted March 9, 2008 Share Posted March 9, 2008 Going slightly OT but does anyone know of a company that will make you smaller quantitys of these? I have about 100-200 cables and the smalest lemark will make is 500. If not, an easy ay of cables marking without having to take plugs off and so I can still put a company name on them, instead of just different coloured tape and zipties. RichWhat about heat shrink? I have had heat shrink made with my company details printed onb it, then it slips right over the XLR plug and you shrink it down on the XLR. Not so great for mains though Link to comment Share on other sites More sharing options...
Sirch Sound Posted March 9, 2008 Share Posted March 9, 2008 Yes I thought about this, but I was always woried about the heatshrink slipping off the XLR and not looking very good. Do you know how much you paid for the heatshrink? CheersRich Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.