Guest joewhite903 Posted February 25, 2008 Share Posted February 25, 2008 Hi all ive had in the past few months a number off source foggers come in with the same fault. As you can imagine my boss wants a quick fix if it takes time bin it, These are the Evolution SM1200. They are all blowing the pcb fuse not the iec use. Plug them in, they warm up fine ready light comes on and as soon as you press the fog button the fuse blows. unplug the pump try again same thing on every unit. As some off you know source went bust and reapered under the name off Zoom Manufacturing. If anybody else has come acros this fault and repaired them, would they be kind enough as to tell , Thanks Joe Link to comment Share on other sites More sharing options...
KevinE Posted February 25, 2008 Share Posted February 25, 2008 No experience with the Source (Smokestream) model you have..most people throw these in the bin. But I'm puzzled why the fuse is blowing only when you pump! I can only imagine something like a leaky snubber cap or MOV across the output to the pump. Does it have the mains pump or a low-voltage thing? Link to comment Share on other sites More sharing options...
Guest joewhite903 Posted February 26, 2008 Share Posted February 26, 2008 Hi there its the 240v pumps, Same type thats in the martin magnum 2000, ive tried a different pump so its not that.Its quite spectacular when the fuse blows you dont want to be in line off sight with it when it goes as it explodes. Ta Joe Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.