peterejones Posted October 30, 2007 Share Posted October 30, 2007 Hi all, I'm looking for software to control the Folsom Image pro using the ethernet connection, to enable control over wireless using my laptop (Win XP). I'm not looking to control under show conditions. My particular application is using the device to scale LED video walls, we already control the LED wall Processor using Wi-Fi, but I have found nothing off the shelf to control the imagepro. A comprehensive scoot around the Barco site hasn't revealed anything. Thanks Pete Link to comment Share on other sites More sharing options...
lukemh Posted October 30, 2007 Share Posted October 30, 2007 Hi all, I'm looking for software to control the Folsom Image pro using the ethernet connection, to enable control over wireless using my laptop (Win XP). I'm not looking to control under show conditions. My particular application is using the device to scale LED video walls, we already control the LED wall Processor using Wi-Fi, but I have found nothing off the shelf to control the imagepro. A comprehensive scoot around the Barco site hasn't revealed anything. Thanks PetePeter no laptop control available you will need to use a desk. there will be a unit in the new year but the software specs are not confirmed at the moment. What are you trying to control however? Luke Link to comment Share on other sites More sharing options...
back_ache Posted October 30, 2007 Share Posted October 30, 2007 looking for software to control the Folsom Image pro using the ethernet connection, to enable control over wireless using my laptop (Win XP). I'm not looking to control under show conditions. My particular application is using the device to scale LED video walls if there isn't a ready made app you could always just do it yourself A quick google reveal it is a plain-text interface (whether you are going in via IP or RS232) so if you are looking for ad-hoc and not particularly speedy, just telnet onto the device, if you will be doing the same thing repeatedly, just use a scriptable telnet client and if you want a polished interface to give a client, create a GUI using something like stardraw control http://www.stardraw.com/products/stardrawcontrollite/ Link to comment Share on other sites More sharing options...
Pete McCrea Posted October 30, 2007 Share Posted October 30, 2007 As Luke Says there is no software available to control that line of products (Personally I'm after something for the Screen Pro II). The Ethernet port is mainly for Firmware updates and possibly linking units together as destinations under a Screen Pro Controller. I have heard rumours of software in development to allow control of the SP II via a laptop as can be done using the Analog Way equipment. Hopefully it will be along soon. Link to comment Share on other sites More sharing options...
lukemh Posted October 30, 2007 Share Posted October 30, 2007 It was shown at infocomm - but wont be released till the end of the year Link to comment Share on other sites More sharing options...
peterejones Posted October 30, 2007 Author Share Posted October 30, 2007 Thanks for the replies, I just need to edit parameters, in particular the output timing of the DVI output. I was hoping that somebody might have already taken the time to write a small application. I might have a go, but then again I'd probably never find the time. Thanks Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.