brokenjoe Posted April 17, 2007 Posted April 17, 2007 anyone know the power consumption of a xr3801?? or hass anyone got a spec sheet? many thanks
Jivemaster Posted April 17, 2007 Posted April 17, 2007 If its 2 x 1200 then it will only draw the full power into an industrial servo load in "Typical Audio" its more likely to draw less than a quarter of its rated power, prob more like an eighth. You really should try it as its mostly down to audio power content. Add a good allowance for the start-up surge, bring amps up separately.
niclights Posted April 18, 2007 Posted April 18, 2007 I'm not sure what the actual rating is - specs/manual proved illusive last time I tried to find, but I do know it will run fine through 13A on 230v driving hard if that's of any help. Damn docs used to be available. With I'd saved them now!
brokenjoe Posted April 18, 2007 Author Posted April 18, 2007 I'm not sure what the actual rating is - specs/manual proved illusive last time I tried to find, but I do know it will run fine through 13A on 230v driving hard if that's of any help. Damn docs used to be available. With I'd saved them now! yeah, I've been running it on a separate 13a supply, with my 2 pulse 4x300s on another.. just wondered if I could put them all through the same without blowing the fuse..
Girlyboy Posted April 18, 2007 Posted April 18, 2007 Don't remember it off the top of my head, but if it helps allay your fears, in one of our rehearsal rooms we run 2 x XR3801, a RA3001, 2 x SR707, a Soundcraft SM12 and various other bits (graphics and fx) off a single 13amp socket without any problems. The 13amp socket is part of a 32amp ring main. Girlyboy Just had a look at an XR3801 manual this morning - the specs are pretty basic. There is a small heading that says 'Current Requirement: 220/240V - 15A'
Jivemaster Posted April 19, 2007 Posted April 19, 2007 The MAplin Power Monitor SocketWAS £26.99 SAVE £12.00 Until 15/05/2007 L61AQ 2338 14.99 Is back down to £14.99 for the next 28ish days Works well
lee.basham Posted June 25, 2007 Posted June 25, 2007 I'm not sure what the actual rating is - specs/manual proved illusive last time I tried to find, but I do know it will run fine through 13A on 230v driving hard if that's of any help. Damn docs used to be available. With I'd saved them now! If you still want the specs drop me a line on lee.basham@lj-electronics.com and I shall send them to you. thanksLee Basham anyone know the power consumption of a xr3801?? or hass anyone got a spec sheet? many thanks If you still need the specs sheet drop me a line on lee.basham@lj-electronics.com and I'll send them through ThanksLee Basham
niclights Posted June 25, 2007 Posted June 25, 2007 Tnx. That would be handy. I did read your posts re repairs with interest. You might want to remove mail address from forum posts though. Spam bots love trawling them up :)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.