Steve Cavill Posted October 9, 2006 Share Posted October 9, 2006 You can make one of these... I have made one, but I need a little help in sourcing some new parts to improve it a little, after a few minor teething problems at the weekend. Can anyone help me source the following; An electonically operated solenoid switch, which opens when power is applied and closes when power is absent.Cyclinder connection that goes down to 3/8" with stop valve and pressure bleed valve. I have the rest, just need to improve on it. Thanks,Steve Link to comment Share on other sites More sharing options...
kje-kev1459 Posted October 10, 2006 Share Posted October 10, 2006 hi, I can help, what is the working pressure, working temp and direct acting or assisted lift? I warn you they are not cheep.... good luck kev Link to comment Share on other sites More sharing options...
slipstream Posted October 10, 2006 Share Posted October 10, 2006 http://www.goldbright.com.cn/uploadpic/1.0559993629504.jpg Thes are about $50 but lets not go there - I doubt anyone would fill them for you in this country R Link to comment Share on other sites More sharing options...
Steve Cavill Posted October 11, 2006 Author Share Posted October 11, 2006 Topic Closed. Went out and bought one in the end, seemed easier than spending more money on building one. Plus the bought one is a LOT safer! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.