Teflon Posted July 10, 2006 Posted July 10, 2006 I have an etc express 24/48 console and one of the DMX sockets on the back has stopped working. has anybody got any ideas as to why this has happened?? it was working and I havn't changed any of the settings to either of the DMX ports. has this happened to anybody else??is there any known fixes?is this a common fault?
elarsen Posted July 10, 2006 Posted July 10, 2006 I have an etc express 24/48 console and one of the DMX sockets on the back has stopped working. has anybody got any ideas as to why this has happened?? it was working and I havn't changed any of the settings to either of the DMX ports. has this happened to anybody else??is there any known fixes?is this a common fault? If no setting has been changed, the DMX chip may have been be damaged.Try looking at the SETTINGS menu to see whats allocated to that output. If correct set, contact your dealer or ETC Techical Services at +44 (0)20 8896 1000 for support. Kind Regards Erik LarsenMarket Manager, EuropeElectronic Theatre Controls
Recommended Posts
Archived
This topic is now archived and is closed to further replies.